modular home update

[Beach Goddess]

I just read an old thread about modular homes and I thought I'd throw in my two cents, albeit a bit late.

We plan to relocate to northern Walton or Okaloosa in about a year and after buying overpriced land we will have a modular home assembled there.

Our home will be a Deltec home. The difference there is the polygonal design. You've all seen them around I'm sure. We were concerned about them after Katrina, Dennis, etc. but in viewing beachfront video from Ivan, Dennis, and Katrina, we saw numerous Deltecs standing unscathed while traditional houses were crumbled beside it.

There are no guarantees in life, of course, but it just makes sense that only an eight foot wall will hit the winds headon and that's got to be better than twenty or thirty feet of a flat square box.

I come from Louisiana, where modular homes (i.e. trailers) are regularly twisted by tornadoes so I'm not a fan of them all. But the controlled environment of assembly (i.e. inside a factory) has got to be better. If they split into pieces after assembly, then it was the contractor, not the product.

You can't fight physics and the shape has simply got to be a plus (www.deltechomes.com).

 

[Beachlover2]

Thanks for the info - I am interested in hearing from anyone else about this product. We have a piece of property near the bay we are going to build on - hopefully in the next couple of years and are exploring all our options.

 

[Kurt]

I'm interested in why you think it will be cheaper than traditional building. What does your cost comparison look like?

They sure do have a great PR department - google "deltec hurricanes" and you'll see a lot of articles in newspapers across the country. Interesting that they are all similar articles with identical quotes (press releases).

I hope you are taking a careful look at how they are constructed and secured, especially on site not just at the factory. On their site they seem to be touting the shape as defying wind, rather than specific methods. :scratch:

​

Deltec Circular Homes stand up to high winds for three important reasons:

1. A Deltec Home has no single, flat section wider than eight feet. This minimizes large areas where wind can build and create pressure, which would easily collapse a conventional square or rectangular home. And the circular design insures that any force exerted against one side of the structure is distributed out the opposing side, similar to the spokes of a wheel.

2. Deltec?s one of a kind roof system aids its wind resistance by using the optimal pitch to equalize any downward pressure or uplift infamous to high winds.

3. The Deltec Circular Home is built to strict specifications. Panelization provides the home with extremely high tolerances using the highest quality materials, giving the home exceptional strength and durability. Proven to last through even the worst of conditions, Deltec Homes are constructed to resist high winds and safely keep the structure intact.

http://www.deltechomes.com/media/4round.jpg

http://www.deltechomes.com/media/4roundcloseup.jpg

The north end of the county is pretty safe except for tornadoes spawned from hurricanes, falling trees.

 

[spinDrAtl]

Modular homes are not necessarily trailers. Trailers are normally referred to as manufactured homes, which are built offsite. Modular homes have the walls, roof, etc. brought in and are assembled on the homesite.

 

[Beach Goddess]

I have visited the model home in NC and we have talked to them extensively for three years now. Honestly, my husband is more involved in the specifics than I am.

I do have a friend who is in the process of having one built in Colorado and she seems very satisfied with everything so far. She has toured several Deltecs and all the owners are extremely pleased.

As for the cost, we have the design kit which lists all the prices and doing a rough estimate (since we are still about two years from building) our price (just the parts not the construction) for ap. 1600 sq feet is around 70K. That includes the hurricane package, and high quality pieces such as name brand windows and Hardie planking on the side. Even if installation is 100K (which I would find hard to believe) then the house would still be cheaper than a new comparable one there. The installation time is supposed to be less than a week if you have an experienced contractor and there is one in Pensacola who has installed these before. Deltec has told us that, of course, NC has the largest number of the homes, but Florida is second.

I'll have my husband get online this evening and give more details of what he knows. This does seem to be a sound product with a good history. Modular is growing in popularity and quality these days. There's a good show on DIY called "Assembly Required" that highlights the different companies. Deltec was featured awhile back.

Right now I'm not worried about the house as much as just reeling from reading all of your posts about insurance. We are planning to find an acre of land up north of Defuniak or Crestview. I saw the post about north of the waterway going up 70+ percent. I just can't imagine.

 

[SHELLY]

I just read an old thread about modular homes and I thought I'd throw in my two cents, albeit a bit late.

We plan to relocate to northern Walton or Okaloosa in about a year and after buying overpriced land we will have a modular home assembled there.

Our home will be a Deltec home. The difference there is the polygonal design. You've all seen them around I'm sure. We were concerned about them after Katrina, Dennis, etc. but in viewing beachfront video from Ivan, Dennis, and Katrina, we saw numerous Deltecs standing unscathed while traditional houses were crumbled beside it.

There are no guarantees in life, of course, but it just makes sense that only an eight foot wall will hit the winds headon and that's got to be better than twenty or thirty feet of a flat square box.

You can't fight physics and the shape has simply got to be a plus (www.deltechomes.com).

I suggest you contact a Florida insurance agent (that's assuming of course you can find one willing to write new Florida homeowners insurance :roll: ) and have them punch in the info of your intended home. There may or may not be a premium applied for a "non-traditional" structure.

 

[Beach Goddess]

You know, I've wondered about the "non-traditional" structure thing, but Florida is filled with "non-traditional" structures of many sorts and someone, even if it is the wonderful (choke) Citizens has got to be writing policies for them. Like I wrote before, Florida is Deltec's second largest market so hopefully their good track record in hurricanes will help. I just don't know. Since my husband and I decided to try to move down there I've had a myriad of people here in North Louisiana try to talk me out of it because of the hurricanes. Well, two years ago I was down there on Memorial Weekend and had to return early because a tornado caused thousands of dollars of damage to my home in my absence and last fall Hurricane Rita came right through my back yard so now I just tell them that something's going to happen anywhere and you might as well try to live in your own paradise. I guess that's what we will do. We'll figure out a way to make it work somehow.

 

[Bob]

Is that multi-sided building a Deltec home on 30A[south side],just east of cr83????

 

[John R]

a structure i'm considering: http://www.coloradoyurt.com/yurts.htm

The yurt's natural strength:
Rafters push inward on compression ring and outward on tension cable, which acts in a similar way to a hoop on a barrel preventing the rafters from moving/spreading outward.

An aerodynamic shape:
The yurt's aerodynamic shape allows the wind to easily flow around it rather than pushing against flat walls.

Roof Load:
Roof loads are transferred down the rafters to the tension cable.

 

[Chickpea]

a structure i'm considering: http://www.coloradoyurt.com/yurts.htm

The yurt's natural strength:
Rafters push inward on compression ring and outward on tension cable, which acts in a similar way to a hoop on a barrel preventing the rafters from moving/spreading outward.

An aerodynamic shape:
The yurt's aerodynamic shape allows the wind to easily flow around it rather than pushing against flat walls.

Roof Load:
Roof loads are transferred down the rafters to the tension cable.

I want to come visit you if you get a yurt!!