So in a store, lets say a computer store, that hazardous waste info is available to me if I walk in and ask for it, or if I was an employee it would be located where I could readily access it if need be?

So in a store, lets say a computer store, that hazardous waste info is available to me if I walk in and ask for it, or if I was an employee it would be located where I could readily access it if need be?

So in a store, lets say a computer store, that hazardous waste info is available to me if I walk in and ask for it, or if I was an employee it would be located where I could readily access it if need be?
Firefighters and EMS personall do site Pre-plans all the time and yes they go to the bussiness and ask to look around to see what it there. And most of the time the bussiness allowes them to because that have nothing to hide and if they are not in complaiance with something they are advised of the rule because most do not know every rule there is in running a bussiness. If the firefighters are not allowed to do a walk through then the fire inspector is notified to do a inspection of the bussiness and they have the LAW on their side and are allowed into any bussiness to conduct a fire safety inspection.
Well, according to the news and every other recycler there are hazardous materials in computers. When the county does there annual haz mat collection they separate these items with attempts to keep them from the landfills and recycle them.
According to the news and scientists their are hazardous materials in water. But at this time, I am unaware of there being an amount that falls within regulatory guidelines for the purpose of the Community Right to Know Act.
Based on the class action lawsuits that federal prisoners are attempting to file against recyclers I do not doubt this either. If I was running a recycling operation I would imagine that the rules would be different.
Come to think of it, I do not remember them issuing MSDs for computer or peripherals at this time. They are starting to have to certify some of the metal content due to another regulation in California though.
Where can I dispose of unspeant charges of these???
[FONT=Arial,Bold]Handling procedures and[/FONT]
equipment:For industrial use only. Keep out of reach of children. Use with adequate ventilation. Use only in[FONT=Arial,Bold]
powder actuated tools designed to handle these boosters. All employees should be familiarized
with the safe operating procedures and requirements for powder operated tools as described in
ANSI A10.3. Practice good hygiene; i.e. wash after using and before eating or smoking.Storage requirements:[/FONT]Store in a cool dry place. Do not crush or drop. Keep away from excessive heat (such as
extremely hot surfaces and flames), electrical current, strong acids and oxidizers. NFPA 495
requires 15 feet separation (or 1-hour firewall) from flammable liquids, flammable solids, and
oxidizers.
[FONT=Arial,Bold]Spill, leak or release:[/FONT]Not applicable.
[FONT=Arial,Bold]Waste disposal:[/FONT]Misfires should be stored in a closed container until disposal or as otherwise required by local,
state, and provincial safety, health and environmental regulations. The recommended disposal
method is in a burner specifically designed to destroy ammunition. Consult with regulatory
agencies or your corporate personnel for disposal methods that comply with local, provincial, and
federal safety, health and environmental regulations.
Call the Walton County Landfill and let them direct you.
If you are going to invoke the law, then please provide a statutory citation for verification. But as for my store, the local fire chief has been in there many a time and is always welcome. I am one of those that actually do try to follow the rules, that is why I am against additional regulations that are created for the sole purpose of catching those that currently are not following the regulations we already have in place.