TooFarTampa said:
You mean, people talk about SHELLY in real life? And how do you pronounce it if it's all in caps? Do you shout it?
Not picking on you (too much), SHELLY ... just wondering, how many locals lurk here without posting? Must be a lot.
P.S. regarding construction costs: Are they really that low on average? I thought if we were going to have to build a custom home on our Seagrove lot, which we won't be doing anytime soon, we could figure $200-225 a square foot with the current market. I also thought Watercolor, Rosemary, etc, were closer to $250 and up. As always it varies with builder, architect, and how much high end stuff you want in the house.
Too Far, I think that your numbers are close to the actual building cost at this time. I am involved in local residential housing and keep a close eye on the numbers.
Along 30-A expect about $200-225/sf. The cost to build in Watercolor, is about $250/sf for the raw builder's costs -not including the builder's fee. (Closer to $300/sf when this is included).
Keep in mind that there are a few factors pushing costs up right now. Some of them are nationwide factors such as material costs (China is sucking up a lot of the world's steel and concrete, pushing prices up), others are local.
Local Issues:
Local Subcontractors are driving up the costs substantially. They have a captive market in the planned communities such as Watercolor, that have build-out clauses. They know that those home owners have a limited time to get their homes built and are not in a position to argue over pricing. And, because they have their hands full doing these homes it's a simple matter of supply and demand pushing up prices even for those outside of these communities.
Location -I'm afraid that just being in south Walton as opposed to north Walton will result in higher prices. Some of this can be attributed to tighter building codes here, we are required to meet a higher wind load etc. As a specific example, framing costs are about 3 times as high in south Walton as opposed to Freeport.
Affordable Housing - Our building costs are 2.5 times higher than for areas only a few hours away. In a 'normal' scenario, we would be drawing in contractors from these surrounding areas attracted by the higher profit margins, but as we have no affordable housing in the area, this isn't happening. Hence, no price competition.
Although it would be difficult to pin an actual percentage of construction cost value on it, another important factor is the higher level of detailing, appliances, etc. which have now become standard in south Walton homes. A few years ago, no one considered granite countertops and high end stainless steel appliances as the 'norm' for housing construction. If you could settle for laminate countertops and GE appliances etc. you can significantly reduce the overall building cost.
I recently reviewed a bid for a concrete block house in Seagrove Beach that came in at around $275/sf. The house next door, also concrete block built 5 years ago cost $106/sf.
If construction in Watercolor, and other communities like it, slows down it could help moderate prices.
If we could address the affordable housing issue and attract more labor to the area, this will moderate prices.